<tbody id="id6er"></tbody>

        <track id="id6er"><div id="id6er"></div></track>
        <tbody id="id6er"></tbody>

        北京雷達手表官方維修售后

        Authorized maintenance

        北京雷達維修服務中心

        北京雷達維修客戶服務電話:

        TEL:400-061-9500
        雷達
        保養維修您的雷達腕表
        Maintain and repair your watch
        當前位置:北京雷達維修 > 腕表資訊 >

        雷達手表產生誤差原因

        作者:雷達維修服務中心   日期:2021.01.23

               Rado watches always pay attention to the quality of watches. Every watch is hand-made, which gathers all the efforts of all craftsmen. Every watch made is a classic. The travel time error of Rado watch is one of the common watch faults. Even the watch like Rado can't avoid it. So why does Rado watch have travel time error? Here are the professional technicians of Beijing Rado maintenance center.

               The battery of Rado quartz meter has no power or insufficient capacity and needs to be replaced with a new one. However, the pointer quartz electronic watch often finds that the battery has no power in a short time. According to the official website of Rado watch, this situation is generally caused by high power consumption or poor quality of the battery itself. In this case, we should first find out the reason, remove the fault, and then replace the new battery.

               Contact is not good, most of the positive and negative contact reed on the dirt, poor contact with the battery. The contact between the signal output point on the circuit board and the lead out point of the coil wire head will also have poor contact. All of these will cause the circuit not to conduct, and make the quartz electronic watch slow, fast or stop. If the circuit is blocked due to poor contact, the contact surface should be fully cleaned first, and then reassembled.

        北京雷達維修中心

               The daily difference of Rado mechanical watch is normal in 45 seconds, but the new watch usually goes faster. When the oil goes away, it will slowly return to normal. In addition, too intense movement will also affect the normal operation of the mechanical watch's balance wheel, which will directly cause the watch's inaccurate travel time.

               There are many reasons for the inaccuracy, high accuracy and long-term stability of Rado mechanical watch, such as aging, failure and the quality and quantity of lubricating oil. Maybe the watch is magnetized. Don't wear a mechanical watch in places with large magnetic field such as computers. Now you need to go to Beijing Rado for after-sales degaussing.

               Beijing Rado after sales service center warm tips: the accuracy of the watch, in addition to its own quality, has a lot to do with the daily wearing habits of watch friends. We should not worry about the daily accuracy of the watch which is almost zero error. All watches have a certain error range, within which we say the travel time of the watch is accurate. If your watch goes wrong, please recognize Beijing Rado after-sales service, and the professional technicians of Beijing Rado after-sales service will check and repair it for you.

        本文鏈接:http://www.kittysdrawings.com/rado_information/440.html

        常見問題
        雷達表維修
        雷達石英手表偷停原因
        版權所有:北京愛瑞時鐘表技術服務有限公司 北京雷達表官方維修中心 Copyright © 2018-2032 | XML
        維修服務電話:400-061-9500
        Rado雷達手表維修服務中心地址在北京市東城區王府井東方廣場
        網站備案/許可證號:京ICP備17029474號-8
        在線預約

        腕表服務線上預約

        China

        關閉
        選擇預約到店時間:
        備注信息(非必填):
        400-061-9500
        客服在線時間:8:00-22:00
        溫馨提示:為節省您的時間,建議盡早預約可免排隊,非在線時間的預約將在客服上線后聯系您
        當前頁面永久關閉

        雷達手表售后維修

        VIP服務熱線

        400-061-9500

        {日本一卡2卡3卡4卡无卡免费,国产成_人_综合_亚洲_国产绿巨人,国产精品亚洲精品日韩已满十八小,亚洲AV综合伊人AV一区加勒比}

          <tbody id="id6er"></tbody>

              <track id="id6er"><div id="id6er"></div></track>
              <tbody id="id6er"></tbody>